Brian, Author at Professional Distributed PV Module Manufacturer

How to Size a Commercial Rooftop Solar System: A Practical Guide for EPCs

For commercial and industrial (C&I) rooftop solar projects, the maximum number of panels a roof can accommodate does not necessarily determine the most suitable system size.A factory may have sufficient roof space for a large PV installation, but its electricity consumption, grid connection…

By Brian October 13, 2026OthersNo Comments

5400 Pa Snow Load: How to Choose PV Modules with 30 mm or 35 mm Frames

For PV projects in Alpine and other high-snow-load regions in Europe, selecting a module based only on a “5400 Pa” rating or a 30 mm vs 35 mm frame height is not enough.A more reliable approach is to first determine the project-specific snow load according…

By Brian October 7, 2026Installation & O&MNo Comments

Maysun solar Commercial solar panel project

Carbon Footprint and LCA in European C&I Solar: Why EPCs Should Check Before Module Procurement

Solar power is widely regarded as a low-carbon energy source. However, generating electricity from solar energy and manufacturing a low-carbon solar module are not quite the same thing.Before a photovoltaic module leaves the factory, it passes through multiple manufacturing stages, including silicon processing,…

By Brian September 30, 2026All BlogsNo Comments

HEMS and Dynamic Electricity Pricing: From Solar Generation to Smart Energy Management

For years, home solar systems have focused on one main question:How much electricity can my rooftop solar system generate?But as home batteries, smart meters, electric vehicles and flexible electricity tariffs become more common, residential energy management is entering a new phase.The more important…

By Brian September 23, 2026All Blogs, Application Scenarios, Industrial NewsNo Comments

Maysun Solar’s First 3.5 MW Solar EPC Project in Italy Enters Its Final Stage

A large-scale commercial and industrial rooftop solar project with a total capacity of approximately 3.5 MWp is now entering its final stage in the Turin area of Piedmont, Italy. Around 8,000 solar modules planned for the project have now been fully installed. The system…

By Brian September 18, 2026All Blogs

August European Solar Industry News

In August 2026, Europe’s solar market combined record PV generation with volatile power prices driven by heat, gas costs and low wind output. Policy support also expanded, including 800 W plug-in solar in Great Britain and greater EU flexibility for PV and storage investments, while module prices largely stabilized amid renewed oversupply.

By Brian September 3, 2026All Blogs, Industrial News

Industrial Roofs with Limited Load Capacity: Lightweight or High-Efficiency Solar Panels?

On an existing industrial roof, “lighter is better” is not a reliable module-selection rule. The first question is how much additional load the roof can safely accept. Only then does it make sense to compare module weight, power density, mounting method and the…

By Brian August 27, 2026Application Scenarios

How to Verify Solar Panels Before Buying: Datasheets, Certifications, Warranties and Delivery Inspection

A datasheet, an IEC certificate and a 25- or 30-year warranty can make a solar module look fully validated on paper. For a reliable purchasing decision, however, those documents are only the starting point. The electrical ratings, mechanical design, certificates, connectors, warranty terms…

By Brian August 21, 2026All Blogs, Application Scenarios

How to Choose Solar Panels for Low-Load-Bearing Industrial Roofs: A Guide to Weight, Power Density and Mounting Systems

Choosing solar panels for a low-load-bearing industrial roof requires more than checking the weight of an individual module.A more reliable process starts by determining the roof’s remaining load-bearing capacity. The complete load from the modules, rails, fasteners and ballast must then be calculated…

By Brian July 22, 2026All Blogs, Application Scenarios, Installation & O&M

How Rear Ventilation Cools Rooftop Solar Panels

Why Do Solar Panels Lose Power in Hot Weather? How Temperature Coefficient and Roof Ventilation Affect Summer Energy Yield

Summer brings stronger sunlight and longer daylight hours, so it is normally one of the most productive seasons for a solar system. However, some system owners notice that solar panel output does not continue to rise during the hottest part of the day.…

By Brian July 13, 2026All Blogs, Installation & O&M, Solar Technology